Your driveway becomes the reliable surface you need it to be. No more worrying about cracks that let water seep through and damage your foundation. No more embarrassment when guests pull up to a deteriorating entrance.
Professional paving installation means you get smooth, even surfaces that handle New Jersey’s freeze-thaw cycles without breaking apart. Your property value increases immediately, and you stop throwing money at temporary fixes that never last.
The right asphalt contractor does more than just lay down material. We grade properly, ensure drainage flows away from your home, and use techniques that prevent the common problems most homeowners face within the first few years.
We’ve been serving Readington families since 1948. Three generations of hands-on experience means we’ve seen every soil condition, drainage challenge, and weather pattern this area can throw at a driveway.
We treat every project like it’s our only project. While other crews rush between multiple jobs, we focus completely on your site until it’s finished correctly. No shortcuts, no compromises.
Readington’s rolling terrain and clay-heavy soils require specific preparation techniques. Most contractors don’t understand how water moves through this landscape, leading to premature failure. We know exactly how to work with local conditions instead of against them.
First, we evaluate your existing surface and drainage patterns. Most driveway problems start with poor preparation, so we take time to understand how water moves across your property during heavy rains.
Next comes proper excavation and grading. We remove old material completely and create the correct slope for drainage. The base gets compacted in layers using commercial equipment—not the shortcuts that cause settling later.
Finally, we apply hot asphalt at the right temperature and thickness for your specific traffic needs. The surface gets rolled and finished to create that smooth, professional appearance that lasts. You get a driveway that handles daily use without developing the ruts and cracks that plague rushed installations.
Ready to get started?
Every driveway paving project includes complete site preparation, proper grading for drainage, and quality materials applied at the correct thickness. You get professional equipment operation, not hand tools that create uneven surfaces.
Readington’s suburban properties often have unique challenges like steep grades, narrow access, or existing landscaping to work around. We handle these situations without damaging your lawn, gardens, or existing hardscaping.
The service includes cleanup and disposal of old materials, plus clear communication about curing time and when you can safely drive on your new surface. You also get straightforward pricing with no surprise charges for “unforeseen conditions” that experienced contractors should anticipate from the start.
Most residential driveway paving projects in Readington take 1-2 days to complete, depending on size and site conditions. Day one typically involves excavation, grading, and base preparation. Day two focuses on asphalt application and finishing.
Weather plays a role in scheduling. Asphalt needs dry conditions and temperatures above 50 degrees for proper installation. Readington’s clay soils also need adequate drying time after rain before excavation can begin safely.
You can usually drive on your new driveway within 24-48 hours, but heavy vehicles should wait at least a week. The asphalt continues curing for several months, reaching full strength over time.
Standard residential driveways in Readington typically use 2-3 inches of asphalt over a properly prepared base. This thickness handles normal car and light truck traffic without issues.
Driveways that see heavier use—like homes with large trucks, RVs, or frequent deliveries—benefit from 3-4 inches of asphalt. The extra thickness prevents rutting and extends the surface life significantly.
Thickness alone doesn’t determine quality. Poor base preparation under thick asphalt still leads to failure. A properly prepared base with appropriate asphalt thickness for your specific use creates the longest-lasting results.
If more than 30% of your driveway shows cracking, settling, or surface deterioration, replacement usually makes more sense than patching. Extensive cracking often indicates base failure that repairs can’t fix permanently.
Look for signs like water pooling in multiple areas, large cracks that let weeds grow through, or sections that have settled more than an inch below the original grade. These problems typically worsen quickly and cost more to repair than replace.
Age also matters. Driveways older than 15-20 years in Readington’s climate often have underlying issues that make replacement the more economical long-term choice, especially if you’re planning to stay in your home.
Residential driveway paving costs in Readington typically range from $3-7 per square foot, depending on site conditions, access, and preparation requirements. A standard two-car driveway runs approximately $2,000-5,000 for complete replacement.
Costs increase with challenging site conditions like steep grades, poor drainage, or limited access for equipment. Properties requiring extensive excavation or special base materials will be toward the higher end of the range.
The lowest bid isn’t always the best value. Contractors who skip proper preparation or use thin asphalt applications often create driveways that need replacement within 5-7 years instead of lasting 15-20 years with proper installation.
Late spring through early fall offers the best conditions for driveway paving in Readington. Asphalt plants typically operate from April through November, with peak quality during warmer months when materials stay hot longer.
Summer installation allows the asphalt to cure properly before winter freeze-thaw cycles begin. However, extremely hot days can make working conditions difficult and affect surface quality, so we often schedule early morning starts.
Fall installation works well if completed before consistent freezing temperatures arrive. Winter paving is possible but requires special handling and may cost more due to material transportation and heating requirements.
A properly installed asphalt driveway in Readington should last 15-20 years with basic maintenance like sealcoating every 3-4 years. New Jersey’s climate creates challenging conditions, but quality installation techniques handle freeze-thaw cycles effectively.
Factors affecting lifespan include base preparation quality, asphalt thickness, drainage design, and maintenance consistency. Driveways that develop drainage problems or weren’t properly prepared may show issues within 5-7 years.
Regular maintenance like crack sealing and periodic sealcoating can extend life beyond 20 years. The key is addressing small problems before they become major failures that require complete replacement.
Local Resources
Useful Links
Other Services we provide in Readington
