You’re tired of watching your driveway crack and crumble every spring. Pennsylvania’s brutal winters put asphalt through hell—30 to 50 freeze-thaw cycles that turn small cracks into expensive problems.
When we install your driveway, you get pavement that’s built from the ground up to handle what Pennsylvania throws at it. Proper base preparation, correct thickness, and drainage that actually works. Your investment stays solid through every season.
No more emergency repairs. No more water pooling in your driveway. Just smooth, reliable pavement that looks professional and performs year after year.
We’ve been handling Pennsylvania’s paving challenges since 1948. We’ve seen every type of weather damage, drainage issue, and foundation problem this region can produce.
What sets us apart is simple: we focus on one job at a time. While other contractors juggle multiple sites, our crew gives your project complete attention from start to finish. Every client gets treated like our most important client because that’s how we’ve built our reputation over seven decades.
Falls property owners choose us because we understand local conditions. We know how the soil behaves, how water moves, and what it takes to build asphalt that survives Pennsylvania winters.
First, we evaluate your property’s drainage and soil conditions. Pennsylvania’s freeze-thaw cycles destroy driveways that aren’t properly prepared, so we spend time getting the foundation right.
Next comes excavation and base preparation. We remove old material, grade for proper water flow, and install a compacted stone base that won’t shift when the ground freezes. This step determines whether your driveway lasts 10 years or 25 years.
Then we install the asphalt at the correct thickness for your specific needs. Residential driveways get 3-4 inches of compacted asphalt, applied hot and rolled smooth. We monitor temperatures throughout the process because proper compaction only happens within specific temperature ranges.
Finally, we handle the details that other contractors skip—clean edges, proper transitions to existing pavement, and clear instructions for curing time before you can drive on it.
Ready to get started?
Your driveway paving project includes everything needed to handle Pennsylvania’s climate challenges. We start with proper excavation and grading to prevent water from pooling or flowing toward your foundation.
The stone base gets compacted in lifts using professional equipment—not just spread and hoped for the best. We use aggregates that perform well in freeze-thaw conditions and won’t shift when temperatures drop.
For Falls properties, drainage is critical. We ensure water flows away from your driveway and foundation, preventing the freeze-thaw damage that destroys poorly planned installations. Every project includes proper edge work and transitions that won’t crack or separate over time.
Our asphalt mix is designed for Pennsylvania weather. The right binder content, proper aggregate gradation, and installation techniques that account for local temperature swings. You get pavement that flexes with temperature changes instead of cracking.
Most residential driveway paving projects in Falls take 1-2 days from start to finish. Day one covers excavation, base preparation, and grading. Day two handles asphalt installation and final cleanup.
Weather affects timing significantly in Pennsylvania. We need dry conditions for proper base preparation and temperatures above 50°F for asphalt installation. During optimal conditions in late spring through early fall, we can often complete smaller driveways in a single day.
After installation, you’ll need to wait 24-48 hours before driving on new asphalt. Cooler weather extends this curing time, which is why we recommend completing paving projects before late fall temperatures arrive.
Most residential driveways in Falls need 3-4 inches of compacted asphalt over a properly prepared stone base. This thickness handles normal passenger vehicles and light trucks while providing adequate strength for Pennsylvania’s freeze-thaw cycles.
If you have heavier vehicles or commercial traffic, we recommend 4-5 inches of asphalt. The base preparation matters just as much—we typically install 6-8 inches of compacted stone base for residential driveways, more for commercial applications.
Thickness alone doesn’t guarantee longevity. Proper drainage, correct base preparation, and quality installation techniques matter more than just adding extra asphalt. We evaluate each property’s specific needs rather than using one-size-fits-all specifications.
Driveway paving costs in Falls typically range from $3-7 per square foot for standard residential installations, depending on site conditions, access, and current driveway condition. A typical 600 square foot driveway runs $1,800-4,200 installed.
Several factors affect pricing: excavation requirements, drainage improvements needed, stone base depth, and asphalt thickness. Properties with poor drainage or unstable soil require more preparation work, which increases costs but ensures long-term performance.
We provide detailed written estimates that break down each component—excavation, base material, asphalt, and labor. No surprise charges or vague “extras” that appear later. You’ll know exactly what you’re paying for before work begins.
Late spring through early fall offers the best conditions for driveway paving in Falls. We need ground temperatures above 50°F and several dry days for proper base preparation and asphalt installation.
Fall installation provides excellent results because ground temperatures remain stable from summer heating, typically 60-65°F at 6-inch depths. This prevents the differential settling common with spring’s freeze-thaw affected ground.
We recommend booking your project by August to secure preferred scheduling. Quality contractors fill up quickly during optimal paving season, and weather windows can close fast once temperatures start dropping in late fall.
Properly installed asphalt driveways handle Pennsylvania winters without significant cracking when built with correct base preparation, adequate thickness, and proper drainage. The key is preventing water from getting under the pavement where it can freeze and expand.
Pennsylvania’s 30-50 annual freeze-thaw cycles will eventually cause some minor cracking in any pavement. However, quality installation with proper materials delays this process for many years. We use asphalt mixes designed for cold weather flexibility.
Regular maintenance extends pavement life significantly. Sealcoating every 2-3 years and prompt crack repair prevent small issues from becoming major problems. Most of our installations show minimal cracking for 10-15 years when properly maintained.
Yes, proper drainage is essential for every driveway installation in Falls. Pennsylvania’s climate makes water management critical—poor drainage leads to frost heave, washouts, and premature pavement failure.
We evaluate each property’s water flow patterns during our initial site visit. This includes checking existing drainage, identifying low spots where water collects, and ensuring proper slope away from foundations and structures.
Our installation process includes correcting drainage problems before any asphalt goes down. We adjust grading, install drainage structures when needed, and ensure water flows to appropriate areas. Fixing drainage during initial installation costs far less than dealing with water damage later.
Local Resources
Useful Links
Other Services we provide in Falls
