When asphalt paving is done right, you stop worrying about it. No puddles that freeze into hazards every winter. No cracks spreading across your driveway six months later. No uneven parking lot that makes customers think twice about your business.
Proper paving installation means smooth surfaces that drain correctly, handle Pennsylvania weather, and look professional for years. You’re not calling someone back next season to fix what should’ve been done right the first time. The base is solid, grading works, and the finished surface performs exactly as it should.
That’s the difference between cutting corners and doing it correctly.
We bring expertise dating back to 1948—three generations of solving drainage challenges, handling difficult properties, and avoiding shortcuts that create problems. We work on one project at a time, giving your driveway or parking lot full crew attention until it’s finished correctly.
No juggling multiple jobs. No rushing to the next site. No vague promises about coming back later. Every property owner in Falls, PA gets the same treatment: honest assessments, clear timelines, and quality work that holds up. Our five-star reviews on Angie’s List reflect decades of satisfied customers who refer us to neighbors.
Experience like that doesn’t happen by accident.
First, old surfaces get removed—damaged asphalt or concrete hauled away so you start clean. Next comes grading and drainage work. If water doesn’t drain properly, it pools underneath and destroys pavement from below. We grade your property to create proper slope so water moves away instead of collecting.
Then the sub-base goes in—a solid, compacted aggregate layer that provides real support. This foundation determines whether your asphalt lasts three years or thirty. After the base is ready, the binder layer creates a strong bond. Then comes the surface layer: smooth asphalt laid hot, graded precisely, and compacted while workable.
Finally, everything gets rolled to lock it together. Proper compaction removes air pockets and creates the tight, durable finish that handles Pennsylvania’s freeze-thaw cycles without cracking apart. Each step exists for a reason—skip one, and you’ll see problems within seasons instead of decades.
Ready to get started?
We handle residential driveway paving with correct thickness, proper drainage, and finishes that enhance curb appeal. For commercial properties in Falls, PA, we install parking lots that handle daily traffic without constant repairs. Customers notice cracked, uneven pavement—the right installation prevents those problems upfront.
We also tackle industrial paving and water management solutions. Properties with complicated layouts, drainage issues, or challenging terrain get custom approaches that generic contractors can’t deliver. Every project includes transparent communication about needs, costs, and timelines—no surprises or unnecessary upselling.
Seniors, military members, and first-time customers receive special discounts. After 75 years serving Falls, PA, we believe in supporting the community that’s supported us.
Typical residential driveways take one to three days depending on size and conditions. That includes removing old material, preparing the base, and laying new asphalt. Commercial parking lots take longer—sometimes a week or more for extensive areas.
The actual asphalt laying is fast. What takes time is prep work that ensures longevity: proper grading, base installation, and compaction can’t be rushed. After installation, you can walk on surfaces within a day and drive carefully within a few days. Full curing takes about 30 days—during this time, avoid sharp turns and heavy loads in the same spots.
Weather affects timing. Rain delays work because moisture interferes with compaction and bonding. Extreme temperatures also impact scheduling. We plan around conditions and keep you updated when weather changes timelines.
The difference is in the base. Cheap paving skips proper base preparation or uses inadequate thickness—saving money upfront but costing you when surfaces crack or fail within years. Quality paving starts with properly compacted sub-bases that provide real support.
Drainage separates good from bad work. Low-cost contractors ignore grading or do minimal work to move water away. When water pools or seeps underneath, you get cracks, potholes, and premature failure. Quality work includes proper slope and drainage that protects your investment.
Material thickness matters. Residential driveways need at least two to three inches of asphalt over solid bases. Commercial lots need four inches or more. You’ll also see differences in compaction quality, edge work, and whether contractors show up when promised. Cheap paving looks acceptable for a season, then falls apart. Quality paving lasts decades.
Yes, when installed correctly. Pennsylvania’s freeze-thaw cycles are tough, but proper installation accounts for this. The key is strong sub-bases that act as frost barriers and prevent heaving when temperatures fluctuate.
When water gets under asphalt and freezes, it expands and pushes surfaces up. When it thaws, surfaces settle back. This constant movement cracks and destroys poorly installed pavement. Properly compacted bases prevent water infiltration and provide stability that resists frost damage.
Drainage is equally critical. If water pools or doesn’t drain properly, it gets underneath and causes winter problems. Correct grading ensures water moves off pavement instead of sitting there waiting to freeze. Quality asphalt paving in Falls, PA accounts for local weather during every step—from base thickness to compaction to final grading. That’s why some driveways last five years while others last twenty-five.
It depends on actual damage. Small cracks or minor surface issues can be repaired and sealed to extend pavement life for years—that’s cost-effective when underlying structure is solid.
But widespread cracking, significant potholes, drainage problems, or crumbling surfaces usually mean replacement makes more sense. Those issues indicate base problems that repairs can’t fix. Patching over failing foundations wastes money and delays the inevitable.
We assess your property and explain what’s needed—whether existing asphalt is strong enough to overlay or if everything needs replacement. Age matters too: if pavement is 20-plus years old with multiple issues, replacement provides a fresh start with proper drainage. Sometimes the right answer is repairing now, sometimes it’s investing in replacement that lasts another two decades. You deserve straight answers based on your property’s condition, not what’s most profitable for us.
Start with verified customer reviews. Five-star ratings on Angie’s List or Google tell you more than sales pitches. Look for patterns: do people mention quality work, clear communication, and projects that held up? Or complaints about contractors who disappeared or rushed jobs?
Ask about their process. Quality contractors explain what they’ll do and why each step matters—base preparation, drainage solutions, proper compaction. Contractors who gloss over details probably cut corners. Experience counts. Decades in business with verifiable examples means they’ve handled challenging conditions and are still around because they do it right.
Pay attention to how they treat you initially. Do they pressure immediate decisions or upsell unnecessary services? Or do they listen, assess honestly, and give options? The best contractors know their reputation depends on satisfied customers who refer others. They earn business through straightforward communication and quality work—not by being the cheapest bid or smoothest talker.
Residential driveway paving typically runs $3 to $7 per square foot depending on site conditions, material thickness, and prep work. A standard two-car driveway might cost $2,500 to $6,000 or more. Commercial parking lots cost more due to size and thicker asphalt requirements for heavier traffic.
But what you’re getting matters more than the number. Low bids that skip proper base prep or use thin asphalt save money now but cost more when you’re repaving in five years instead of twenty. Fair prices reflect quality materials, proper thickness, correct drainage, and installation that lasts.
Site conditions significantly affect costs. Drainage corrections, difficult equipment access, or extensive base work increase prices—that’s doing what’s necessary for surfaces that perform correctly. Ask what estimates include: old material removal, base preparation, grading, material thickness, compaction, and cleanup. Compare what you’re getting, not just bottom-line numbers. We offer discounts for seniors, military, and first-time customers, with upfront pricing before work begins—no surprises.
Local Resources
Useful Links
Other Services we provide in Falls
