You get a driveway that doesn’t embarrass you every time someone pulls up. No more apologizing for the potholes or the weeds growing through cracks.
When we’re done, your asphalt handles Pennsylvania’s brutal freeze-thaw cycles without turning into a minefield. The surface stays smooth, water drains properly, and you’re not calling for repairs every spring.
Most importantly, you get peace of mind. Your investment is protected by proper base preparation, quality materials, and installation techniques that work with our climate—not against it.
Productive Asphalt has been handling Pennsylvania’s paving challenges since 1948. That’s 75+ years of figuring out what works in our climate and what doesn’t.
We’re not the company that shows up, throws down some asphalt, and disappears. Every project gets our full attention—one job at a time—because that’s how you ensure quality when Pennsylvania weather doesn’t give you second chances.
Our approach is straightforward: treat every client like they matter, communicate clearly throughout the process, and deliver work that holds up to our winters. It’s worked for three generations of Richland families and businesses.
First, we assess your property’s drainage, soil conditions, and current surface. This isn’t a five-minute walkthrough—proper base preparation determines whether your asphalt lasts five years or twenty-five.
Next comes excavation and grading. We remove inadequate base material and install proper stone foundation with the right compaction. Most paving failures start here, so we don’t rush this step.
Finally, we install hot-mix asphalt designed for Pennsylvania’s temperature swings. Our crews work efficiently while the material is at optimal temperature, ensuring proper compaction and bonding that creates a surface built to last.
Ready to get started?
We handle everything from residential driveways to commercial parking lots and industrial paving projects. Each requires different approaches, materials, and techniques.
For Richland homeowners, that means driveways engineered for daily use and Pennsylvania weather. Proper thickness, quality materials, and installation timing that works with our climate patterns.
Commercial properties get heavy-duty solutions designed for traffic loads and business needs. We understand that your parking lot affects your customers’ first impression, so we plan projects to minimize disruption while delivering professional results.
Most residential driveways take 1-2 days from start to finish, depending on size and complexity. Commercial projects vary based on square footage and site conditions.
The actual paving happens quickly—it’s the preparation work that takes time. Proper excavation, base installation, and grading can’t be rushed if you want results that last. Weather also affects timing, since we won’t install asphalt in rain or when temperatures drop below 50°F.
You can typically drive on new asphalt within 24-48 hours, though we recommend avoiding heavy vehicles for the first week while the surface fully cures.
An overlay adds new asphalt over existing pavement that’s structurally sound but showing surface wear. It’s less expensive and faster than full replacement.
Complete replacement involves removing old asphalt, fixing base problems, and installing entirely new pavement. This is necessary when you have significant cracking, drainage issues, or base failure.
We’ll assess your current surface and recommend the approach that makes sense for your situation and budget. Sometimes an overlay buys you years of additional life; other times, full replacement is the only way to solve underlying problems properly.
Timing and technique are everything. We monitor weather forecasts to ensure proper installation windows with stable temperatures above 50°F and no precipitation.
Our hot-mix asphalt is formulated specifically for Pennsylvania’s climate challenges. The material maintains workability longer in moderate temperatures, allowing proper compaction before cooling.
Base preparation is critical—we install adequate stone depth with proper compaction to handle frost heave. Poor base work causes most winter damage, so we don’t cut corners on foundation preparation even if it adds time to the project.
Sealcoating every 2-3 years is the most important maintenance step. This protects against water infiltration, UV damage, and chemical spills that break down asphalt binder.
Crack filling should happen promptly when you notice surface cracks. Small cracks are easy and inexpensive to fix; large cracks mean expensive repairs. Pennsylvania’s freeze-thaw cycles turn minor issues into major problems quickly.
Keep the surface clean and ensure proper drainage around edges. Standing water is asphalt’s biggest enemy, especially when it freezes and expands during winter months.
Residential driveways typically range from $3-7 per square foot for complete installation, depending on site conditions, access, and material thickness required.
Factors affecting cost include excavation needs, base preparation requirements, drainage improvements, and project complexity. Simple rectangular driveways cost less than curved designs with multiple elevation changes.
We provide detailed written estimates that break down material, labor, and preparation costs. No surprises or hidden fees—you know exactly what you’re paying for before work begins.
Local contractors understand Richland’s specific challenges—soil conditions, drainage patterns, and weather timing that affects installation success.
We’re invested in our community reputation. When problems arise, you can reach us directly rather than dealing with distant corporate offices or subcontractors who may not return calls.
Local companies also respond faster for service calls and warranty work. Your project isn’t just another job number—it’s our reputation in the neighborhood where we live and work.
Local Resources
Useful Links
Other Services we provide in Richland
